Author: Contec Cleanroom
Date: 06/14/2023
Reading time:
Tags: Cleanroom, Residue Removal

Disinfectant Residue Removal Recommendations

There are many options for developing a residue removal step to a cleaning and disinfection program. Below are examples of steps that can be taken to remove residues from the controlled area or cleanroom. These are general recommendations and are to be used as guidance independent of the disinfectant used. Always follow site Standard Operating Procedures (SOPs). Solutions used may be dependent upon the surfaces to be  cleaned, environmental versus product contact.

3 Residue Removal Steps with Dry Wipe on Wet Surface

  1. Allow disinfectant to meet validated wet contact time.

  2. Wipe wet disinfectant with dry wipe or mopping tool.

  3. Remove excess residue with 70% presaturated wipe.

 

3 Residue Removal Steps with Presaturated Wipe on Dry Surface

  1. Allow disinfectant to meet validated wet contact time.

  2. Let surface dry.

  3. Remove disinfectant residue with presaturated 70% IPA wipe (may have to be repeated depending on the severity of the residue).

 

4 Residue Removal Steps for Floors, Walls, and Ceilings for Dry Surfaces with WFI

  1. Allow disinfectant to meet validated wet contact time.

  2. Let surface dry.

  3. Apply WFI to surface using mop or sprayer (if sprayer is used, ensure water does not get into hard to reach places, if there is a risk for that, it is not recommended).

  4. Mop or vacuum until dry.

 

5 Residue Removal Steps for Floors, Walls, and Ceilings with Detergent

  1. Allow disinfectant to meet validated wet contact time.

  2. Let surface dry.

  3. Apply detergent to surface using mop.

  4. WFI rinse with mop.

  5. Follow up dry mop or vacuum.

 

2 Residue Removal Steps for Floors, Walls, and Ceilings on Wet Surfaces

  1. Allow disinfectant to meet validated wet contact time.

  2. Follow with dry mop or vacuum
return to overview back to top